The difference between lumens and lux
Lumens measure the light a luminaire emits; lux, the light that reaches a surface. One lux is one lumen spread over one square metre. The same luminaire gives many lux if it is close and concentrates the beam, and few if it is far away or spreads it. That is why an installation cannot be sized by adding up lumens: it has to be calculated.
Lux levels chart for different areas
| Space or task | Lux |
|---|---|
| Living room, general light | 100 – 200 |
| Reading and sofa | 300 – 500 |
| Kitchen, general light | 200 – 300 |
| Kitchen worktop | 500 |
| Bedroom | 50 – 150 |
| Bathroom, mirror | 300 – 500 |
| Corridors and stairs | 100 – 150 |
| Space or task | Lux |
|---|---|
| Office, screen-based workstations | 500 |
| Meeting room | 500 |
| Archive and circulation areas | 100 – 200 |
| Shop, general light | 300 – 500 |
| Window display and accent | 1,000 or more |
| Restaurant, dining room | 50 – 200 |
| Professional kitchen | 500 |
| Space or task | Lux |
|---|---|
| Warehouse | 100 – 200 |
| Assembly and workshop | 300 – 500 |
| Precision work | 750 – 1,000 |
| Garage and car park | 75 |
| Entrance hall and common areas | 100 – 200 |
How to read recommended lux levels
They are average levels on the plane where the task is carried out — the table, the worktop, the floor in a corridor — and they are a guide. For workplaces there are reference values in the standard EN 12464-1 and legal minimums in workplace regulations. In homes there is no obligation, and comfort rules.
Three important nuances: a 60-year-old needs considerably more light than a 20-year-old for the same task; dark finishes absorb light and require more to be installed; and a high level badly distributed is worse than a moderate, uniform one.
Lux levels, glare and colour: level is not everything
Two rooms with the same lux can look completely different. What counts is where the light falls — if it lights walls and ceiling, the space seems brighter with less power — glare, colour temperature and colour rendering. And in homes and hospitality, what you want is almost never the maximum, but the ability to turn it down.
How to measure lux levels in a room
Before the works, with a lighting calculation that simulates the space. Afterwards, by measuring with a lux meter on a grid of points. The first avoids surprises; the second confirms them.
Lux levels: frequently asked questions
How many lumens do I need per square metre?
As a very rough approximation, the desired lux multiplied by the square metres gives the lumens that must reach the surface, and considerably more must be installed because part of the light is lost. The real figure depends on the height, the optics and the finishes, which is why it is calculated.
Is too much light a bad thing?
Yes. Besides consumption, excess light flattens the space, increases reflections and tires the eyes. A sufficient, dimmable level is more useful.