Skip to content
Contact
  1. Home
  2. Home automation
  3. Building automation

Automation projects · Balearics

Building automation systems in Mallorca

Automation of residential, corporate and public buildings on all four islands: one infrastructure for every installation.

EDI · LUX3000 K

Building automation systems: central control of the building

When automation is applied to an entire building, the idea is the same as in a home but on another scale: lighting, climate, ventilation, access, lifts, pumping and consumption stop being isolated installations, each with its own timer and panel, and are seen and managed from a single station.

We act as a specialist engineering firm: we design the solution, write the technical project, coordinate the different installers and validate that everything works together before handover. We work with open, standard protocols, so the building does not depend on a single manufacturer or a single maintenance company.

What a building automation system can control

  • Common areas: lighting by presence and schedule, in line with the building lighting project.
  • Climate and ventilation: schedules, setpoints and car park ventilation according to air quality.
  • Access: control of doors, garage and video door entry.
  • Consumption: electricity and water metering by zone or by user, with leak detection.
  • Technical alarms: fault alerts for pumps, lifts or panels, sent straight to maintenance.
  • Supervision: a single dashboard, local and remote, for the administrator and the maintenance company.

How we install a building automation system

We work as a specialist automation engineering firm and take on the complete implementation of the installation, in six steps.

  1. Design of the technology solutionWe define with you what the installation must do and choose the right system for that use and that budget.
  2. Technical projectDiagrams, drawings, quantities and equipment schedule: the documentation the site management and the installer need.
  3. Site supervisionFollow-up of the works so that what is installed is what was designed.
  4. Coordination and validation of all installationsElectricity, climate, audio, blinds and security tested together, not each on its own.
  5. Programming and commissioningWe configure scenes, schedules and automations, and adjust them with the space already in use.
  6. Handover and demonstrationWe show you how to use the installation, hand over the documentation and remain available for changes.

Automation systems: KNX, DALI and wireless

We design with standards such as KNX and DALI in new builds, and with wireless systems in finished spaces. The automations run locally, without depending on the internet. If you want to compare options, read the guide DALI, KNX or Casambi.

A building automation system in Mallorca, Ibiza, Menorca and Formentera

Our studio is in Palma and we work on all four islands: Mallorca, Ibiza, Menorca and Formentera. We also carry out projects in the rest of Spain.

A building automation system: frequently asked questions

What is the difference between home automation and building automation?

Home automation refers to dwellings, and building automation to commercial or whole buildings: offices, hotels, public buildings or residential blocks with common areas. The technology is largely the same; the scale and type of management change.

Can an existing building be automated?

Yes. It usually starts with what saves most — lighting of common areas and car park, climate and metering — and is extended in phases.

Free enquiry, no obligation

Request a quote for a building automation system

Tell us which space you want to light or automate and what stage it is at. We will get back to you as soon as possible.

  • Mallorca
  • Ibiza
  • Menorca
  • Formentera
  • Turnkey
  • No obligation