Skip to content
Contact
  1. Home
  2. Guides
  3. DALI vs KNX vs Casambi

Lighting guides

DALI vs KNX vs Casambi: which lighting control system

DALI, KNX, DMX and Casambi do not compete with each other: they solve different things and are often combined. This is what each one does and when we propose it.

By Estudio de Iluminación · Updated on 19 November 2026

EDI · LUX3000 K
100 %60 %30 %

What DALI is: the language of luminaires

DALI is a digital protocol created specifically for lighting. Each luminaire has an address and is dimmed individually over a two-wire bus, which can run in the same conduit as the power. It lets luminaires be grouped and scenes created without touching the wiring, and the current version, DALI-2, also reports the status and faults of each driver.

It is the natural choice in offices, hotels, shops and new-build homes with carefully designed lighting.

What KNX is: the system for the whole building

KNX is an open standard for home and building automation. It is not limited to light: it manages blinds, climate, access, consumption and alerts, with devices from hundreds of manufacturers that are compatible with one another. It is decentralised — it does not depend on a single brain — and very long-lived.

In a complete home automation project, KNX is usually the backbone and DALI connects to it through a gateway for fine control of the lighting.

What DMX is: colour and effects

DMX was born in the entertainment world. It is very fast and designed to handle many channels at once, which makes it ideal for coloured light, dynamic effects, façades and stage-like spaces. It is not the right tool for the general lighting of a home or an office.

What Casambi is: wireless Bluetooth lighting control

Casambi is a wireless system based on Bluetooth Low Energy. The luminaires form a mesh network among themselves and are configured from an app, with no control bus and no central panel. There are push-buttons, sensors and gear from many compatible manufacturers.

It is the solution we use most in refurbishments, historic buildings, restaurants and finished homes: it allows real dimming and scenes without opening a single chase.

DALI or KNX: how to choose

  • New build with full automation: KNX with DALI for the lighting.
  • New build, lighting only: DALI with its own controller.
  • Refurbishment or finished space: wireless control.
  • Façades and coloured light: DMX, integrated into the general system.

The decision is taken at the start, together with the luminaires, because it conditions the drivers and the wiring. We define it within the lighting control project.

DALI, KNX and Casambi: frequently asked questions

Is a wireless system reliable?

Yes, when the network is properly planned. Mesh networks get stronger as devices are added, and control runs locally, without depending on the internet or the home wifi.

Can several systems be combined?

Yes, and it is common. There are gateways between KNX, DALI, DMX and wireless systems, so the user operates a single installation.

What about 0-10 V or phase-cut dimming?

They still exist and are valid in simple installations, but they do not allow each luminaire to be addressed or its status to be read, and dimming at low levels is usually worse.

Free enquiry, no obligation

Request a quote for your lighting project

Tell us which space you want to light or automate and what stage it is at. We will get back to you as soon as possible.

  • Mallorca
  • Ibiza
  • Menorca
  • Formentera
  • Turnkey
  • No obligation